SebArt Mini BEA Hawk T1 90mm 1.42m Military SCHEME RC Airplane
1. it requires LiPo battery
2. it requires power motor system
3. it require 6 Channel radio transmitter,6 Channel receiver

Acrobatic Jet 90mm EDF or P20 Jet Turbine RTF with fiberglass fuselage painted outside mould, wings and stabilizers in balsa covered with Oracover. Electric aluminum landing gear, doors servos and front steering servo factory installed.
The all new Bae Hawk Jet ARF was designed by Italy aerobatic pilot Sebastiano Silvestri. This sport ARF jet-model design is based real aircraft design and modifided adding the ultimate aerodynamically ideas of the modernst pattern models and using the 15 years experience in flying jets of Seba.... the result is
surprising! This innovative design combined with the lightweight structure, the fiberglass fuselage and all wood airframe wings and stabs, give the Mini Bae Hawk Jet ARF an impressive precision and smoothness at any airspeed and flight condition. Thanks of his low wingload and the powerfull 90mm 12 blades EDF-6S or the P20 micro turbine, it can be a fantastic aerobatic jet-trainer, let you surprise from your new Bae Hawk Jet ARF !
Aluminium retracts gears, 2 door-servos and 1 front steering servo (INCLUDED AND FACTORY INSTALLED)
FEATURES
- Wing Span: 1420mm / 55.9in
- Length: 1400mm / 57.08in
- Wing area: 32dm2 / 496sqin
- Weight (without battery): 3kg / 105.82oz
- Flying weight: 3.85kg / 135.80oz
- Type of kit: ARF
- Servos :3x servos 12g / 0.02lb
- EDF Diameter Class (mm): 90
- Surfaces: Ailerons, Rudder, Elevator, Flaps
- Landing Gear : Metal retract landing gear
- Material : Fiberglass, Balsa, Oracover wings coverage
- Build time : 16 hours
- Radio requires : 6 channels minimum
- Recommended pilot skill level: Intermediate, Advanced
It requires :
- 1x 90mm EDF and motor
- 1x ESC
- Minimum 6 channels radio and receiver
- 7x sub micro servos 17g (1x rudder, 2x elevator, 2x ailerons, 2x flaps)
- 5000-5800 mAh 35-50c Lipo Battery 6 cells
- Lipo Battery Charger 6 cells
