SebArt Avanti XS Jet 1.9m (White/Red/Gold) ARF (no retracts) RC Airplane
1. it requires LiPo battery
2. it requires power motor system
3. it require 7 Channel radio transmitter,6 Channel receiver

Following the success of the Avanti S Mini version in EDF and kerosene, Sebart offers a larger version with the possibility of installing both versions of the engine.
Like its little brother, the Avanti XS, with a wingspan of 1.80m and a length of 1.90m, is designed in the same way, namely a fuselage fiberglass painted after demolding, wings and stabilizers with Oracover and the electric retractable landing gear equipped with brakes, the traps, their three servos and the sequencer traps are already installed.
As the all other products of the brand, the construction and the finish are of irreproachable quality. This model is intended for a 120mm EDF turbine or Kerosene P60/P70. Its weight in flight in EDF version equipped with a 12S 8500mAh battery (2x 6S) is 8.5kg and for the Kerosene version is 7.5kg empty tank.
Characteristics
Wing Span: 1800mm / 70.86in
Length: 1900mm / 74.80in
7.5kg flying weight with P60/P70 turbine empty tank
8.5kg flying weight with an EDF 120mm + battery
All parts of the fuselage are fiber
Wings and Stabilizer in Oracover
Included in the kit
SebArt Avanti XS 120mm Jet 1.9m (White/Red/Gold) ARF
All hardware and all plastic parts needed to assemble the kit
Cockpit and canopy
Decals
Detailed illustrated instructions
It requires to complete in the following(not included):
Radio 7 ch. minimum
6x MG minis servos + 2 standard servos for flaps
Turbine or EDF
Battery: 2x 6S 5000mAh LiPo(EDF version)
ECS 150A brushless Ubec 12A (EDF version)
Conversion kit (Turbine version)
Retractable Landing Gear
Recommended power set up:
P60
P70
Recommended EDF power set up
EDF 120mm thrust 7-9kg (such as JP Hobby 120mm 12S with 2x 6S 5000-5800mAh Lipo)
